language

    RF Series Direct Return Oil Filter

    This filter is used for fine filtration of hydraulic system return oil, filtering out metal particles generated by wear of components in the hydraulic system and rubber impurities of seals and other pollutants, so that the oil flowing back to the oil tank remains clean.

    Classification:

    Contact Advisory:+86-373-5630300

    Product Introduction

    (I) Introduction

    This filter is used for fine filtration of hydraulic system return oil, filtering out metal particles generated by wear of components in the hydraulic system and rubber impurities of seals and other pollutants, so that the oil flowing back to the tank remains clean.

    Performance and Features

    1. This filter can be directly installed on the tank cover or installed with a pipe.

    2. It is equipped with a filter element pollution blockage indicator and a bypass valve to improve the reliability of hydraulic communication. When the filter element is blocked by pollutants or the system fluid temperature is too low, the flow pulsation and other factors cause the oil inlet pressure to be 0.35MPa: the indicator will send a signal to indicate that the filter element should be replaced or the temperature should be increased in time. If the machine cannot be shut down immediately to deal with these faults, the bypass valve on the filter element will automatically open (the opening pressure is 0.4MPa).

    3. The filter element is made of glass fiber, which has the advantages of high filtration accuracy, large oil flow capacity, small original pressure loss, and large dirt holding capacity. Its filtration accuracy is calibrated with absolute filtration accuracy, and the filtration ratio β3, 5, 10, 20>100 filtration efficiency n>99% meets the IS0 standard.

    (II) Model Description

     

    (III) Technical parameters

    Model Nominal flow
    F10W
    (1/min)
    Filtration accuracy
    Filtr
    (μm)
    The way to
    Dia
    (mm)
    Nominal pressure
    Press
    (MPa)
    Pressure 1oss
    (Mpa)
    ndicator Weight
    (kg)
    Mode1 of Element
    Tnitia Max (V) (A)
    RF-60×※ 60 

    1

    3

    5
    10
    20
    30

    20  ≤0.07 0.35  12

    24

    36

    220

    2.5
    2
    1.5
    0.25

    0.4  LH0060R※BN/HC
    RF-110×※ 110  0.9  LH0110R※BN/HC
    RF-160×※ 160  40  1.1  LH0160R※BN/HC
    RF-240×※ 240  1.8  LH0240R※BN/HC
    RF-330×※ 330  50  2.3  LH0330R※BN/HC
    RF-500×※ 500  3.2  LH0500R※BN/HC
    RF-660×※ 560  80  4.1  LH0660R※BN/HC
    RF-850×※ 850  13  LH0850R※BN/HC
    RF-950×※ 950  90  20  LH0950R※BN/HC
    RF-1300×※ 1300  100  41.5  LH1300R※BN/HC

    Note: ※ is the filtration accuracy. If the filtration accuracy is 3μm, it should be written as 003, and 10 μm should be written as 010.

    (IV) Connection size

    Mode Size(mm)
    B1 L L1 h D1 H D d  M t2 B M1 t1 m t3 a b DM
      RF-60×*L-YC 90   166  92 11 φ80 34  φ100 φ5.5 M27×2 16  48  M27×2 16  / / / / /
      RF-110×*L-YC 233 159  M33×2 M33×2 / / / / /
      F-160×*L-YC 120   209  120  11 φ106 40  φ135l φ7  M48×2 20  66  M48×2 20  / / / / /
      RF-240×*L-YC  268  179  N48×2 M48×2 / / / / /
      RF-330×*L-YC 152   271  138  13 φ135 63  φ170  φ9 N60×2 27  85  N60×2 27  / / / / /
      RF-330×*F-YC / / H60×2 M12 23  42.9  77.8  φ50
      RF-500×*F-YC 351 218 / /
      RF-660×*F-YC 196  411  246  13 φ175 83  φ220 φ13.5 / / 110  / / M16 22  61.9  106.4  φ80
      RF-850×*F-YC  492  243 / / / /
      RF-950×*F-YC 255   449  251 14 φ208 93  φ290 φ17.5 / / 136  / / 22  69.9  120.7 φ90
      RF-1300×*F-YC  573  332 121  / / 145  / / 77.8 130.2 φ100

    Note: If the user needs British interface threads, our factory can customize them. Please note the size of the British thread after the model.

    (V) Filter element pressure difference flow curve

    Key words:

    RF Series Direct Return Oil Filter

    Related Products

    Online Consultation

    Leave your contact information and get a free product quote