ZU-A Series Return Oil Filter
The filter is installed on the oil return line of the hydraulic system to filter out metal powder from worn components and rubber impurities from worn seals in the oil, so that the oil flowing back to the tank remains clean, which is beneficial to the recycling of oil in the system.
Classification:
Contact Advisory:+86-373-5630300
Product Introduction
(I) Performance and Use
The filter is installed in the return oil pipeline of the hydraulic system to filter out metal powders from worn components and rubber impurities from worn seals in the oil, so that the oil flowing back to the oil tank remains clean, which is conducive to the circulation of oil in the system.
The filter is divided into four types: chemical fiber type, paper type, mesh type and wire gap type. The chemical fiber type has better filtering effect and higher precision than the paper type. It is more difficult to clean the chemical fiber and paper type filter elements after clogging, so the filter element must be replaced.
The filter is equipped with a pressure difference signaling device. When the filter element is blocked due to pollution and the pressure difference between the inlet and outlet reaches 0.35MPa, a switch signal is issued. At this time, the filter element should be cleaned or replaced.
The filter element is made of glass fiber filter material, which has the advantages of high filtering accuracy, large oil flow capacity, low original pressure loss, and large dirt holding capacity. Its filtering accuracy is calibrated with absolute filtering accuracy, filtering ratio B35, 10, 20>100, filtering efficiency n>99%, which meets the IS0 standard.
(II) Model Description
;
(III) Technical parameters
| Model | The way to (mm) |
Nominal flow (1/min) |
Filtration accuracy (μm) |
Nominal pressure ress.(MPa |
Pressure loss | Bypass valve opening pressure (MPa) |
Transmitter power | Weight | Connection | Filter Model | ||||||
| Initial | Max. | |||||||||||||||
| □U-A10×*P | 10 | 10 |
1 3 |
1.6 | 0.05 | 0.35 | 0.4 | 24V/48W 220V/50W |
2.6 | Thread | TZX₂₂-10×*# | |||||
| □U-A25×*P | 15 | 25 | 3.2 | TZX₂-25×*# | ||||||||||||
| □U-A40× *P | 20 | 40 | 3.6 | TZX₂-40×# | ||||||||||||
| □U-A63×*P | 25 | 63 | 0.07 | 4.8 | TZX₂-63×*# | |||||||||||
| □U-A100×*P | 32 | 100 | 5.8 | TZX₂,-100×*# | ||||||||||||
| □U-A160×*P | 40 | 160 | 0.12 | 6.7 | TZX₂-160x*# | |||||||||||
| □U-A250×*FP | 50 | 250 | 9.5 | Flange | 「ZX_-250×*# | |||||||||||
| □U-A400×FP | 65 | 400 | 0.15 | 14.4 | TZX₂₂-400×*# | |||||||||||
| □U-A630×*FP | 80 | 630 | 22.3 | TZX₂-630×*# | ||||||||||||
| □U-A800×*FP | 90 | 800 | 0.17 | TZX₂-800×*# | ||||||||||||
| □U-A1000×*FP | 100 | 1000 | TZX₂₂-1000×*# | |||||||||||||
| □U-A25×*BP | 20 | 25 | 0.05 | 3.2 | Plate | TZX₂-25×*# | ||||||||||
| □U-A40×*BP | 40 | 3.5 | TZX₂ -40×*# | |||||||||||||
| □U-A63×*BP | 32 | 63 | 0.07 | 3.9 | TZX₂,-63×*# | |||||||||||
| □U-A100×*BP | 100 | 6.2 | TZX₂ -100×*# | |||||||||||||
| □U-A160×*BF | 38 | 160 | 0.12 | 7.0 | TZX₂-160×*# | |||||||||||
| □U-A250×*BP | 50 | 250 | 10.0 | TZX₂₂-250×*# | ||||||||||||
| □U-A400×*BP | 65 | 400 | 0.15 | 15.4 | TZX₂-400×*# | |||||||||||
Note: is the filtration accuracy, # is the filter material. If the medium used is water-ethylene glycol, the filter material is paper with an indicator, the filter model is: ZU BH-A63×*P The filter element model is: TZX2. BH-63×*恽 The filter material is chemical fiber, the filter accuracy is 10-15um with an indicator, the filter model is: Q2U-A63x*P The filter element model is: TZX2-63×*Q The filter material is chemical fiber, the filtration accuracy is 1-5 μm with an indicator, the filter model is: Q3U-A63×*P The filter element model is: TZX2-6 The filter material is metal mesh with an indicator, the filter model is: WU-A63×*P, the filter element model is: TZX2-63×*W
Key words:
ZU-A Series Return Oil Filter
Related Products
Online Consultation
Leave your contact information and get a free product quote